|
If you have any questions on any of our Air Tools
please contact us at (734) 971-1210 Monday-Friday
9-5p.m. EST.
You have found Campbell Hausfeld CHN10399AV 3 8-Inch to 1-1 4-Inch 18 Gauge Narrow Crown Stapler, one of 749 products we have for sale in our Air Tools store. At Tool Realm, we strive to provide the highest quality and lowest prices on all kinds of tools that are available through our merchant partners, including Campbell Hausfeld CHN10399AV 3 8-Inch to 1-1 4-Inch 18 Gauge Narrow Crown Stapler. If you cannot find what you are looking for you may want to visit our complete listing of Air Tools products or use one of the search boxes located above this section. Thank your shopping at Tool Realm!
|
|
|
|
|
|
 |
|
|
Campbell Hausfeld CHN10399AV 3 8-Inch to 1-1 4-Inch 18 Gauge Narrow Crown Stapler
|
Tools & Hardware > Air Tools > Product 10
 |
|
 |
 |
Campbell Hausfeld CHN10399AV 3 8-Inch to 1-1 4-Inch 18 Gauge Narrow Crown Stapler
|
by Campbell Hausfeld
Sales Rank: 3865
|
List Price: $34.99
$34.99
At Amazon
on 8-11-2008.
|
|
3/8- to 1-1/4-inch 18-gauge narrow crown stapler
Adjustable depth guide; quick-release nose door for fast jam clearing
Non-marring tip will not dent the work surface
Includes 1-inch finishing staples, male plug, 2 hex wrenches, oil, carry case
3-year warranty
Product Review
Whether youre tired of that manual stapler or just ready to upgrade, this 18-gauge pneumatic crown stapler from Campbell Hausfeld offers a world of user-friendly features for stapling delicate trim work, light cabinet assembly, and more. This versatile stapler accepts a wide range of staples from 3/8- to 1-¼ inches in length. The narrow, ¼-inch staple width provides steadfast attachment with minimal surface impact. An adjustable depth control offers precision countersinking or flush stapling at your fingertips for stapling trim of varying thicknesses or fastening upholstery to hardwood furniture. A multi-directional exhaust is easy to adjust; keeping discharge out of your face and off the workpiece so you can focus on the stapling. A quick-clear nose means easy jam clearing for less downtime and more productivity. And, a non-marring tip will not dent the work surface for better looking cabinets, upholstery, furniture and trim. Best of all, a rubber comfort grip and sequential trigger make repetitive tasks like underlayment installation and upholstering a breeze. --Brian D. Olson
Whats in the Box
Crown stapler, 1-inch finishing staples, male plug, 2 hex wrenches, tool oil and carry case
Customer Reviews & Comments
This tool will serve it's purpose so long as you are willing to compromise quality for value. I already own a Stanley/Bostitch framing nailer, a DeWalt 15 gauge finish nailer, a Porter Cable 18 gauge brad nailer, and a Bostitch 23 ga. pinner, so I have some basis for comparison. I was disappointed with the Campbell Hausfeld in the following respects, even considering that it's a third the cost of the competition: 1. The case is flimsier plastic than the Porter Cable or DeWalt cases. When pressing the three allen wrenches to get them back in their special slots, the entire case lining compresses as if it were no thicker than a soda bottle. The gun does not quite fit down in the molded recess made for it. All hard cases are a problem in that there is not much room for fasteners, but the box of 1-1/4" staples that came with this one does fit inside. 2. There are no stampings on the tool. There is no serial number. The model number and "date codes" appear on adhesive labels that are applied after the fact, suggesting that perhaps this tool came off the line some factory in China that puts out no-name tools for several buyers to use their own name plates. Campbell Hausfeld does not list this model on their Web site. 3. The bottle of pneumatic oil that came in the case is extremely flimsy, and the top flew off when I tried to squeeze a few drops from the bottle (even after poking a hole in the nipple) sending 30 wt oil splashing across my workshop. 4. The depth of drive adjustment had to be set to it's maximum limit, and even at that not all of the staples were driven flush when driving the 1-1/4" staples that came with the tool through 1/4" birch plywood into 5/4 poplar. With a healthy 80 or 90 PSI from the compressor's regulator, all my other pneumatic fastening tools would countersink the fastener and the depth adjustment has to be backed away from it's maximum position. 5. The staples that came with the tool do not bear any brand name and do not appear to be galvanized like other brands. 6. The tool leaks air from around the trigger during and after it fires, which may be a cause of the power problem in #4. Unless CH will send out a new 0-ring repair kit I intend to return this tool. On the plus side, it did come with a fitting for the air hose which is worth maybe $2.
Comment | Permalink |
(Report this)
|
Campbell Hausfeld CHN10399AV 3 8-Inch to 1-1 4-Inch 18 Gauge Narrow Crown Stapler
List Price: $34.99
Available from Amazon
Price: $34.99
Updated on 8-11-2008.
|
|
|
|
|
NOTICE: All product prices, availability, and specifications
are subject to verification by their respective retailers.
Copyright © 2008, Dominant Systems Corporation
3850 Varsity Drive
Ann Arbor, MI 48108
info@toolrealm.com
Privacy Policy
Last Modified : 8-11-2008
|
|
|
|
