|
If you have any questions on any of our Bits
please contact us at (734) 971-1210 Monday-Friday
9-5p.m. EST.
You have found Irwin 3041006 Speedbor Max 6 Piece 1 2-Inch to 1-1 4-Inch Self Feeding Spade Bit..., one of 749 products we have for sale in our Bits store. At Tool Realm, we strive to provide the highest quality and lowest prices on all kinds of tools that are available through our merchant partners, including Irwin 3041006 Speedbor Max 6 Piece 1 2-Inch to 1-1 4-Inch Self Feeding Spade Bit.... If you cannot find what you are looking for you may want to visit our complete listing of Bits products or use one of the search boxes located above this section. Thank your shopping at Tool Realm!
|
|
|
|
|
|
 |
|
|
Irwin 3041006 Speedbor Max 6 Piece 1 2-Inch to 1-1 4-Inch Self Feeding Spade Bit...
|
Tools & Hardware > Bits > Product 141
 |
|
 |
 |
Irwin 3041006 Speedbor Max 6 Piece 1 2-Inch to 1-1 4-Inch Self Feeding Spade Bit...
|
by Irwin
Sales Rank: 9166
|
List Price: $33.24
$24.00
At Amazon
on 10-31-2008.
|
|
Fits all standard 1/4-inch quick change chucks
Tri-Flute design for faster chip ejection
Cutting spurs have 3 cutting edges for added durabilty
Full screw tip allows the bit to self feed
Grooved hex shank prevents slipping; lifetime warranty
Manufacturer Description
IRWIN Speedbor MAX Six Piece Set includes 1/2-, 5/8-, 3/4-, 7/8-, 1- and 1-1/4-inch bits. The Fastest Speedbor spade bit ever, featuring a Tri-Flute design that allows for faster chip ejection. The Speedbor MAX has cutting spurs with three cutting edges for added durabilty. A full screw tip allows the bit to self feed. The grooved hex shank prevents slipping in drill chuck or bit extension. Speedbor MAX bits fit all standard 1/4-inch quick-change chucks. Set is stored in a heavy-duty case.
Product Description
6 Piece, Speedbor Max Set, Includes 1/2", 5/8", 3/4", 7/8", 1" & 1-1/4" Sizes, Standard Length Speedbor Max Spade Bits, Tri-Flute Design For Faster Chip Ejection, Cutting Spurs Have 3 Cutting Edges For Added Durability, Full Screw Tip Allows Bit To Self Feed, Grooved Hex Shank Prevents Slipping In Drill Chuck Or Bit Extension, Fits All Standard 1/4" Quick Change Chucks.
Customer Reviews & Comments
***Revised 1/7/07, not made for thick material see bottom*** I bought a 5/8 for my cordless drill for your standard hole to run electrical wires through. And found it puts less stress on my motor and drills a lot smother than a standard auger bit (it doesn't "chew" the wood, it drills it out) so I bought the set. They also leave a pretty clean hole, witch I've found to be useful when drill a 2x4 diagonally. So far they have not slipped or ripped they're selves away from work where I don't have full surface contact. It stays pretty sharp I've probly drilled well over 400 holes with the 5/8 I mentioned and is still plenty sharp to be useful.o Bad things: Not all precisely made, many I've tried out seem to be bent or warped a little. They still work fine though, it doesn't seem to effect they're performance at all. NOT a nail eater, if you hit hard metal like a big nail or a cable staple (or masonry) you will have to touch it up with a file (a rounded file, that most don't carry with them). It's got good tempering and toughness for wood and wood like materials but it's just not a vary hard/metal. Try out Greenlee's auger bits, they seem to have the best ware resistance and toughness. Not made for deep holes. Every time I drill DOWN/SIDEWAYS through something thicker than a 4/4 the bit sort of get`s stuck behind the waste martial. Though most bits like this do that. As long as you're not drilling blind all the time and in 2x4 or less type wood they are well worth the money, if they where made out of some harder metal, longer flutes and made truer they would have gotten a five star review at this price easy. *Revise* All but the biggest 3 ("7/8, "1 and "1-1/4) want to get stuck on anything thicker than a 2x4 if you're not drilling upward. Also my Dewalt DC988 drill can make holes with the "1 and "1-1/4 bit, but puts it in a good strain (first gear of corse). If your going to be making multiple holes with the largest two I'd bring out a 6 amp+ corded drill.
|
Irwin 3041006 Speedbor Max 6 Piece 1 2-Inch to 1-1 4-Inch Self Feeding Spade Bit...
List Price: $33.24
Available from Amazon
Price: $24.00
Updated on 10-31-2008.
|
|
|
|
|
NOTICE: All product prices, availability, and specifications
are subject to verification by their respective retailers.
Copyright © 2008, Dominant Systems Corporation
3850 Varsity Drive
Ann Arbor, MI 48108
info@toolrealm.com
Privacy Policy
Last Modified : 10-31-2008
|
|
|
|
