|
If you have any questions on any of our Clamps
please contact us at (734) 971-1210 Monday-Friday
9-5p.m. EST.
You have found All in One Clamp U99 99 Ultra All In One Clamp, one of 749 products we have for sale in our Clamps store. At Tool Realm, we strive to provide the highest quality and lowest prices on all kinds of tools that are available through our merchant partners, including All in One Clamp U99 99 Ultra All In One Clamp. If you cannot find what you are looking for you may want to visit our complete listing of Clamps products or use one of the search boxes located above this section. Thank your shopping at Tool Realm!
|
|
|
|
|
|
 |
|
|
All in One Clamp U99 99 Ultra All In One Clamp
|
Tools & Hardware > Clamps > Product 28
 |
|
 |
 |
All in One Clamp U99 99 Ultra All In One Clamp
|
by E. Emerson Tool Co
Sales Rank: 5903
|
List Price: $132.99
$115.95
At Amazon
on 11-5-2008.
|
|
T-track accepts a variety of accessories stops, router plates, Saw plates
Router, saw plates and stop blocks fit all of the clamps
T-track profile matches on all the clamps so guide plates and stops will fit on all your clamps
Jaws holes accept accessories:tall jaws wide jaws story sticks
Wide aluminum jaws protect soft surfaces
Product Description
The E. Emerson Tool Company U99.5 99-1/2-Inch Ultra Wide Grip Clamp adds extra width for superior rigidity and two T-tracks for attaching a wide range of accessories, including stops, router plates, and saw plates. Wide aluminum jaws protect soft surfaces from wear, and the jaw holes allow you to insert tall jaws, wide jaws, and story sticks. Its 8-foot length accommodates standard sheeting, helping make this the most durable, most robust clamp you can buy.
Product Description
The Ultra Clamp is exactly that, an Ultra Clamp. An extra wide, long rigid straight edge. One solid piece of aluminum. With the same edge profile as the Single Series and the Twin Series, the Ultra accepts all of our accessories. It can be quite difficult to manage sheet goods at times. With the use of a 99" Ultra Clamp, an accessory Wide Jaw and Story Stick length-cuts are made easily without using your table saw.
Customer Reviews & Comments
I can not begin to describe how well this clamping tool guide works. It is easily adjustable to clamp on any width work piece but, obviously, this one was made to rip 8' sheet material. The guide has three levels of clamping force but the first level is enough to secure the guide so that it will not move during ripping. This guide absolutely does not bow to the side as you rip. You can press the base plate of your circular saw tight against the side of this guide and rip away. For the first time I can rip a full 8' sheet of plywood and the cut is consistent width the full length. This is virtually impossible to do with cheaper guides like the thin-gauge, two-piece one from Johnson. This guide has two t-slot tracks as well so you can design jigs and stops to attach to the guide. I purchased the optional 9"x12" HDPE saw plate for circular saws that runs in the T-track of the guide but I haven't used it yet. I don't know if I will ever have the need to. If the guide doesn't bow sideways, and believe me, this one doesn't, you can get a straight cut without the need of linking your circular saw to the guide with the optional plate. The guide has slots that allow you to insert optional ruled scales (SAE or metric). However, I have purchased these and they are no good. The measuring scale is made of thin plastic laminated on paper and is off by 1/8" within 48". See my review for the "All in One Clamp I-99 99-Inch Scale (English)" product. This applies to all the E. Emerson all in one measurement scales that I have purchased. However, the extra wide surface between the T-slots on the Ultra Wide clamp leaves plenty of room to add a quality adhesive backed measurement tape such as those sold for table saw rip fence rails. I plan to purchase one of those to enhance my Ultra Wide. This clamping tool guide is well worth the price and I'm glad I finally made myself try it. Do yourself a favor, through that cheap two-piece tool guide away, or that not quite straight piece of scrap lumber and buy one of these. You'll be glad you did when you start getting really straight cuts from your circular saw. I also have the 54" Ultra Wide, the 50" standard width and the 36" standard width. See my reviews for those too.
|
All in One Clamp U99 99 Ultra All In One Clamp
List Price: $132.99
Available from Amazon
Price: $115.95
Updated on 11-5-2008.
|
|
|
|
|
NOTICE: All product prices, availability, and specifications
are subject to verification by their respective retailers.
Copyright © 2008, Dominant Systems Corporation
3850 Varsity Drive
Ann Arbor, MI 48108
info@toolrealm.com
Privacy Policy
Last Modified : 11-5-2008
|
|
|
|
