|
If you have any questions on any of our Delta Tools
please contact us at (734) 971-1210 Monday-Friday
9-5p.m. EST.
You have found DELTA 36-850 1 4 Horsepower 4-Speed 3-Roller Stock Feeder, 115-Volt 1 Phase, one of 749 products we have for sale in our Delta Tools store. At Tool Realm, we strive to provide the highest quality and lowest prices on all kinds of tools that are available through our merchant partners, including DELTA 36-850 1 4 Horsepower 4-Speed 3-Roller Stock Feeder, 115-Volt 1 Phase. If you cannot find what you are looking for you may want to visit our complete listing of Delta Tools products or use one of the search boxes located above this section. Thank your shopping at Tool Realm!
|
|
|
|
|
|
 |
|
|
DELTA 36-850 1 4 Horsepower 4-Speed 3-Roller Stock Feeder, 115-Volt 1 Phase
|
Tools & Hardware > Delta Tools > Product 139
 |
|
 |
 |
DELTA 36-850 1 4 Horsepower 4-Speed 3-Roller Stock Feeder, 115-Volt 1 Phase
|
by Delta
Sales Rank: 13668
|
List Price: $1,087.80
$620.88
At Amazon
on 12-23-2008.
|
|
115 volt, reversing motor for safe, efficient operation
3 spring-loaded, rubber feed rollers provide positive grip on workpiece
Four speeds match the application 14, 26, 36, and 72 feet per minute
Includes power cord and plug; rubber feed rollers 3; vertical and horizontal support columns; universal joints; additional set of speed-changing gears; lubricating gun
2-year limited warranty on machines, parts, and accessories
Product Review
Feed stock smoothly and consistently and keep your hand away from that sharp cutter with this 4-speed stock feeder from Delta. This versatile feeder mounts vertically, horizontally, and at any angle for a wide variety of feeding operations. After quick and easy setup, the unit feeds material at either 14 or 63 feet per minute with one set of gears. Or, install the second set of gears for feeding speeds of 26 or 33 fpm. A rugged drive system and continuous-duty motor powers a lubricated gear box for feeds so smooth theyll make you smile. Sturdy, fully-adjustable vertical and horizontal support columns and universal joints are equipped with either "T" or "L" locking mechanisms for stability in any mounting position. Large, easy-to-turn hand-wheels move feeders horizontally or vertically along columns. The feeder adjusts vertically from 11-1/4 to 16 inches, and horizontally from 5 to 14-3/4 inches for working with stock of various thicknesses. Should a cut go awry, a reversing motor lets you smoothly back out the material for a second run at it. Three spring-loaded, rubber feed rollers ensure a positive grip on the workpiece and no slipping. The purchase is covered by Deltas 2-year limited warranty on machines, parts, and accessories. -- Brian Olson
Whats in the Box
Delta Industrial Model 36-850 Four-Speed, Three-Roller Stock Feeder with a 1/4 HP, 120V, single-phase, reversing motor; power cord and plug, 3 rubber feed rollers, vertical and horizontal support columns, universal joints, additional set of speed-changing gears, lubricating gun
Product Description
Rugged, Efficient Drive System. continuous-duty motor powers the lubricated gear box, which transmits power to roller chains and sprockets that drive feed rollers. This superior system assures positive feeding of all types of materials.
Customer Reviews & Comments
Over the years I've seen and heard of some horrible accidents in wood shops. Although it's not a standard piece of equipment in most shops, the shaper remains one of the most common culprits for accidents. I myself once had a piece of 3/4 x 3/4 trim fire like an arrow out of a shaper (the finger boards holding the stock had vibrated loose) narrowly missing a guy jointing lumber and bursting into toothpicks when it hit a block wall 15 feet away. I'm sure it would have gone right through him had he been standing 2 feet to the left. That and a couple of other shaper incidents have brought me to the conclusion that one of the best safety devices you can put on a shaper is a stock feeder. Nothing will ever replace common sense or care in using a shaper, but a stock feeder keeps your hands and fingers well away from the cutter head and they provide accurate feeding, positioning and control of material as it is fed against the cutter. Finger boards, hold-downs and positioning jigs are important, but ultimately it's the feeder that ensures constant feed speed and total control. I bought my feeder with my shaper (Delta 3 HP model) and would never consider running the shaper without it. I do everything in my power to avoid using the shaper "free-hand"; on cuts where the use of a feeder is impossible (such as the rails on frame and panel doors) I have jigs with integrated hold downs that achieve the control and positioning of stock while keeping my digits where they belong... as far away from that cutter head as possible. This model from Delta is a very versatile performer, can be positioned in virtually any position or configuration you can think of, and the ability to run it in reverse is very useful in certain situations. Mine is somewhat older and it appears that there have been some design changes and a few components have been changed over to plastic. However, overall it appears to be the same device. Everything is very solidly built and absolutely rigid when locked down. However, if care is not taken during set-up a feeder can also pull pieces directly into or away from the cutter head and it will drag unsecured items such as fence plates into the cutter head too. Check everything prior to turning anything on and then check it again... it could save you more than a ruined piece of wood. The only criticism I have of Delta shapers is the fact that you have to drill the holes in the cast iron table yourself. I can understand why they don't drill holes in a table saw top by default, but a shaper? It's not too arduous to do this, but really this should be something that is done right in the factory even if you don't get a feeder with your shaper (the holes would not interfere or effect the use of the shaper in anyway). If your buying a shaper put a feeder in your budget, you will never regret the decision.
|
DELTA 36-850 1 4 Horsepower 4-Speed 3-Roller Stock Feeder, 115-Volt 1 Phase
List Price: $1,087.80
Available from Amazon
Price: $620.88
Updated on 12-23-2008.
|
|
|
|
|
NOTICE: All product prices, availability, and specifications
are subject to verification by their respective retailers.
Copyright © 2008, Dominant Systems Corporation
3850 Varsity Drive
Ann Arbor, MI 48108
info@toolrealm.com
Privacy Policy
Last Modified : 12-23-2008
|
|
|
|
