|
If you have any questions on any of our Delta Tools
please contact us at (734) 971-1210 Monday-Friday
9-5p.m. EST.
You have found DELTA SA350K Shopmaster Boss 1 4 Horsepower 1,724 RPM Benchtop Spindle Sander with..., one of 749 products we have for sale in our Delta Tools store. At Tool Realm, we strive to provide the highest quality and lowest prices on all kinds of tools that are available through our merchant partners, including DELTA SA350K Shopmaster Boss 1 4 Horsepower 1,724 RPM Benchtop Spindle Sander with.... If you cannot find what you are looking for you may want to visit our complete listing of Delta Tools products or use one of the search boxes located above this section. Thank your shopping at Tool Realm!
|
|
|
|
|
|
 |
|
|
DELTA SA350K Shopmaster Boss 1 4 Horsepower 1,724 RPM Benchtop Spindle Sander with...
|
Tools & Hardware > Delta Tools > Product 217
 |
|
 |
 |
DELTA SA350K Shopmaster Boss 1 4 Horsepower 1,724 RPM Benchtop Spindle Sander with...
|
by Delta
Sales Rank: 20570
|
List Price: $504.00
$290.24
At Amazon
on 12-23-2008.
|
|
Boss spindle sander with complete spindle sander set; 18-inch diameter table
Heavy-duty, 1/4-horsepower motor; oscillating action; built-in dust collection;
Cast-iron construction; rubber spindles
Includes sanding drum, sleeve, 4 spindles 1-inch, 1-1/2-inch, 2-inch, and 3-inch, drum plates, sleeves, table inserts
21 by 21 by 15-1/2 inches; 49 pounds; 2-year warranty
Product Review
If only we'd had one of these when we built those doll cradles--and sanded all the little curves and crannies by hand! This beauty takes all the work out of jobs like that. No burn marks--ever--because of the oscillating action. Sure, you can chuck a little drum sander into your drill press, but you'll have to deal with that annoying gap between the drum and the table. This sander eliminates that. The large cast-iron table measures 18 inches in diameter and sits atop a 1/4-horsepower single-phase motor. A built-in dust collection fan draws down dust and chips through the table insert and into the dust-collection bag. There's room on board to store all the included accessory sanding drums and sleeves. It's light--just 45 pounds--and can be used as a portable sander or mounted to a stand or workbench through predrilled holes in the base. In addition to the standard 3/4-inch sanding drum and sleeve, the kit includes 1-, 1-1/2-, 2-, and 3-inch rubber spindles, drum plates, abrasive sleeves, and table inserts. --Kris Jensen-Van Heste
Product Description
The Delta Model SA350K is the sander of choice for inside curves and intricate contours. Features a 1/4HP, single phase motor, cast-iron table, table insert, 1/2" spindle, 3/4" sanding drum and 3/4" sleeve, dust bag, 3/16" allen wrench, 1/2" socket wrench and instruction manual. Pre-drilled base holes allow you to mount the sander to a stand or workbench. Toggle switch with removeable lock out key prevents unauthorized use. Two built-in compartments make it easy to store accessory sanding drums and sleeves.
Additional Specifications:
Motor: 1/4 HP
Disc Diameter: Spindles - 1/2" thru 3"diameter
Motor: 1/4 HP
Stroke: 7/8"(22 mm)
Strokes per minute: 60
Drum Capacity: Minimum: 3/4" (19 mm), Maximum: 3" (76 mm)
Table Size: 18"(457 mm)
Insert Opening: 4"(102 mm)
Dust Collection Outlet: 1 1/2"(38 mm)
Overall Height: 15"(381 mm)
Overall Depth: 18"(457 mm)
Overall Length: 18"(457 mm)
Weight: 45 lbs.(20 kg)
Customer Reviews & Comments
I tried to make my neighbor write his own review on the Delta spindle sander. But after watching him "type" I decided to assist him. Thought I was slow, jeeeezzz. Anyway this is not my tool, but he is sitting here kibitzing as I type. I actually have the Jet JBOS5(see review). He purchased the Delta because of the lighter weight and smaller size. He is space challenged in his shop (arn't we all) and needed one he could store under the bench when not in use. The Jet is a bit heavy to be lifting up and down a lot, so he went with the Delta. He purchased this at our favorite local wood workers store and it was already assembled and clean. First impression.....lots of plastic, of course that's why its light. The table is flat and has a nice finish, but if you lift the machine up using the table as a handle you would be smart to check for level before using the sander, it will move on ya. The spindles are only 41/2" compared to 6" on the Jet. But you don't get to use the full length on either machine. He got a nice selection of drums with the sander, including the 3". They appear to be adequate to the task, ya gotta be gentle with the smaller diameter ones even on the Jet. Changing spindles is fairly easy. You do have to clamp or bolt down the machine. Because of its light weight it tends to wander a bit around the bench if you don't. He drilled 4 holes in his bench top and use's bolts and wingnuts, works well. We had to make an adapter to hook the dust collector up to this machine. Seems to work ok. The 1/4 hp motor seems a little light to me, but it performs well, even as heavy handed as he is , he hasn't been able to stall the motor, though it does seem to bog down a little on deep pieces. Just needs a little lighter touch, these bench styles are not meant for "hogging". That's what bandsaws are for. The sander is very quiet when running, and has very little vibration. He thinks this sander will do the trick for him, until the day he has a "real" shop and can have a floor model. He recommends it for anyone who needs a lighter unit. UPDATE...It is now February and my woodworking buddy has just brought his 3rd Boss home. The first two broke, after, in my opinion anyway, very little use. Both suffered from the same problem..a small plastic piece on the actuator arm broke, causing the up and down motion to stop working. The second one didn't line up with the hole in the insert very well, and was making growling noise's from the very beginning. He wants to try one more before giving up on the Boss. Will post another update after this one breaks. At least the store was willing to replace em with no hassel at all. UPDATE..APRIL 05..The third boss was returned to the store..same problems...started "growling" after a couple days and after a couple weeks use the same plastic piece inside broke. My friend returned it and traded it in on the Jet spindle sander. Delta was willing to repair it or send him the parts needed, but he decided he would rather not have a machine that required repair every couple of months (or weeks). It's too bad, because when it works this little machine does a pretty good job, and because of it's light weight and smaller footprint, it is easy to move around the shop and stash under the bench. We don't know if it is a design flaw, bad choice of materials used in construction or just shoddy workmanship (maybe a little of all three), at any rate I think he gave the tool a real good chance to prove out and it didn't make the cut. Can't recommend this one.
|
DELTA SA350K Shopmaster Boss 1 4 Horsepower 1,724 RPM Benchtop Spindle Sander with...
List Price: $504.00
Available from Amazon
Price: $290.24
Updated on 12-23-2008.
|
|
|
|
|
NOTICE: All product prices, availability, and specifications
are subject to verification by their respective retailers.
Copyright © 2008, Dominant Systems Corporation
3850 Varsity Drive
Ann Arbor, MI 48108
info@toolrealm.com
Privacy Policy
Last Modified : 12-23-2008
|
|
|
|
