|
If you have any questions on any of our Delta Tools
please contact us at (734) 971-1210 Monday-Friday
9-5p.m. EST.
You have found Delta 36-T30 T2 30-Inch Fence and Rail System, one of 749 products we have for sale in our Delta Tools store. At Tool Realm, we strive to provide the highest quality and lowest prices on all kinds of tools that are available through our merchant partners, including Delta 36-T30 T2 30-Inch Fence and Rail System. If you cannot find what you are looking for you may want to visit our complete listing of Delta Tools products or use one of the search boxes located above this section. Thank your shopping at Tool Realm!
|
|
|
|
|
|
 |
|
|
Delta 36-T30 T2 30-Inch Fence and Rail System
|
Tools & Hardware > Delta Tools > Product 30
 |
|
 |
 |
Delta 36-T30 T2 30-Inch Fence and Rail System
|
by Delta
Sales Rank: 3020
|
List Price: $265.14
$188.28
At Amazon
on 10-21-2008.
|
|
Three-point T-square locking system with hairline pointer to assure fence is parallel to blade and accurate to within 1/64 of an inch, Fence securely clamps to both front tube and rear rail to better allow for fence attachments.
Extruded aluminum face attaches to solid-steel angle iron and tubing for years of continuous use
Easy-gliding, steel tube fence body to handle quick, repetitive cut-off work, precision ripping and squaring cuts.
Quick-removal fence can be located on either side of the blade for consistent ripping capabilities on left or right tilt saws
Additional rear hold-down support for use with jigs and featherboards
Manufacturer Description
This Delta T2 Fence System works with the 36-979 table saw and offers extreme accuracy.
Product Description
Includes Delta® 30" T2 Fence System - 36-T30, T-Square® Commercial Fence, Steel Guide Tube w/ Scale, Front & Rear Support Rails, Mounting Hardware.
Customer Reviews & Comments
I was looking for more rip capacity and ease of use in a fence for my 1970's vintage Rockwell (Delta) contractor's saw. I've long coveted the Beisemeyer-style fences, but I could not justify spending $300+ for the upgrade. When Delta released this fence at this low price, I could not wait any longer. This fence works great for less than half the price of the originals. I have to admit - I purchased the fence from another retailer for a bit less money. But the Amazon deal is actually better - you get the legs and a table board along with the fence for almost the same price. My review will be confined only to the fence itself. The fence comes nicely packaged. I was prepared to spend an afternoon doing the installation, but to my surprise, the fence bolted right onto my saw in about 20 minutes. I guess Delta has not changed the spacing of the bolt holes for the rails over the past 30 years. The instructions were pretty clear, and I had aligned the fence with the saw's slots in a few minutes. The fence includes 2 sets of alignment bolts that make accurate alignment in two planes simple. Although I did not use all the hardware, the fence includes a variety of additional bolts - I am guessing these are for installation on saws that use stamped steel wings, or perhaps different drilling of holes. This fence is a significant upgrade over my original fence. I get an additional 6-8" of rip capacity to the right of the blade (and this is key when trying to rip a piece of plywood in half). The fence glides smoothly throughout its travel left and right. It includes a gauge that makes quick measurements possible by sight (I still use a ruler just to make sure). Although the T2 is a "lighter" version of the original Beisemeyer, this unit is solid - at least for my needs. When the cam is locked there is no noticeable movement side to side. While my old fence had a slight bow that could never be removed, this unit is perfectly straight along its length. Overall, this is an upgrade I'm extremely glad to have made. I would heartily recommend this fence for anyone looking to expand the capacity of their table saw without dropping a huge amount of cash.
|
Delta 36-T30 T2 30-Inch Fence and Rail System
List Price: $265.14
Available from Amazon
Price: $188.28
Updated on 10-21-2008.
|
|
|
|
|
NOTICE: All product prices, availability, and specifications
are subject to verification by their respective retailers.
Copyright © 2008, Dominant Systems Corporation
3850 Varsity Drive
Ann Arbor, MI 48108
info@toolrealm.com
Privacy Policy
Last Modified : 10-21-2008
|
|
|
|
