|
If you have any questions on any of our Disc Sanders
please contact us at (734) 971-1210 Monday-Friday
9-5p.m. EST.
You have found Delta 31-120 12-Inch 1 2 Horsepower Benchtop Disc Sander, 120-Volt 1 Phase, one of 649 products we have for sale in our Disc Sanders store. At Tool Realm, we strive to provide the highest quality and lowest prices on all kinds of tools that are available through our merchant partners, including Delta 31-120 12-Inch 1 2 Horsepower Benchtop Disc Sander, 120-Volt 1 Phase. If you cannot find what you are looking for you may want to visit our complete listing of Disc Sanders products or use one of the search boxes located above this section. Thank your shopping at Tool Realm!
|
|
|
|
|
|
 |
|
|
Delta 31-120 12-Inch 1 2 Horsepower Benchtop Disc Sander, 120-Volt 1 Phase
|
Tools & Hardware > Disc Sanders > Product 30
 |
|
 |
 |
Delta 31-120 12-Inch 1 2 Horsepower Benchtop Disc Sander, 120-Volt 1 Phase
|
by Delta
Sales Rank: 24954
|
List Price: $344.48
$234.04
At Amazon
on 11-8-2008.
|
|
12-inch disc sander with integral dust collection, manual brake stops
1/2-horsepower, 120-volt motor; hose with 2-1/2-inch I.D. connectors
Cast-iron table and base; heavy-duty, steel grit plate
Includes sander and 80-grit abrasive
15 by 17-3/4 by 17-1/4 inches; 72 pounds; 2-year warranty
Product Review
Like you, we don't like to mess around with our sanding--it's dusty, tedious at times, and not one of the more rewarding aspects of woodworking. However, after firing up this 12-inch disc sander from Delta, we're starting to change our tune. Designed as an affordable version of Delta's industrial sander, its cast-iron base supports the machine with vibration-dampening weight, while the tilting table (with positive stops at 45 and 90 degrees) and inset miter slot let you support and position your material. The 1/2-horsepower induction motor spins the heavy-duty steel disc quietly, up to 2,500 rpm. Depress the manual brake lever on top, and the disc stops in seconds--a nice safety feature that truly impressed us. This tool takes off a lot of stock quickly, and removes dust very effectively through a built-in connector hose that attaches to any shop vac. Bolt Delta's disc sander down to your workbench, and get ready to remove life's rougher edges. --Justin Paul
Product Description
Includes 12" Disc Sander w/ Integral Dust Collection - 31-120, 1/2 HP, 120 Volt Motor, Hose w/ 2-1/4" O.D. Connectors, 80-Grit Abrasive Disc, Wrenches.
Customer Reviews & Comments
This is basically a good sander but there are some issues that I discovered. The wheel has axial runout of 0.020 inch at the rim which surprised me, I expected something more like 0.002 inch. Changing the sanding disks is time-consuming. The stock disk is 60 grit, too coarse for my work. It took me an hour to change it. This is because the stock disk leaves all its glue residue on the platter, which is very hard to clean off. I used acetone and steel wool. The platter is smaller than standard so I had to trim the new disk so it would work at all. The angle gauge is very cheesy, it is fixed at 2 points and bows off its mounting surface in between. Despite these problems, I was able to get my job done nicely with this tool. It runs real quiet, is very powerful, and basically user-friendly. The precision table and large size are nice. The 45 degree position stop is not very "crisp" but may improve with use. The tool is greatly enhanced with the Delta 34-779 mitre gauge, available separately. No mitre gauge was included. All in all, it's a good tool but obviously a tool made in China to meet a price target.
|
Delta 31-120 12-Inch 1 2 Horsepower Benchtop Disc Sander, 120-Volt 1 Phase
List Price: $344.48
Available from Amazon
Price: $234.04
Updated on 11-8-2008.
|
|
|
|
|
NOTICE: All product prices, availability, and specifications
are subject to verification by their respective retailers.
Copyright © 2008, Dominant Systems Corporation
3850 Varsity Drive
Ann Arbor, MI 48108
info@toolrealm.com
Privacy Policy
Last Modified : 11-8-2008
|
|
|
|
