|
If you have any questions on any of our Disc Sanders
please contact us at (734) 971-1210 Monday-Friday
9-5p.m. EST.
You have found DELTA 31-695 6-Inch 9-Inch 1 Horsepower Open Stand Belt Disc Sander, 120-Volt 1 Phase, one of 645 products we have for sale in our Disc Sanders store. At Tool Realm, we strive to provide the highest quality and lowest prices on all kinds of tools that are available through our merchant partners, including DELTA 31-695 6-Inch 9-Inch 1 Horsepower Open Stand Belt Disc Sander, 120-Volt 1 Phase. If you cannot find what you are looking for you may want to visit our complete listing of Disc Sanders products or use one of the search boxes located above this section. Thank your shopping at Tool Realm!
|
|
|
|
|
|
 |
|
|
DELTA 31-695 6-Inch 9-Inch 1 Horsepower Open Stand Belt Disc Sander, 120-Volt 1 Phase
|
Tools & Hardware > Disc Sanders > Product 16
 |
|
 |
 |
DELTA 31-695 6-Inch 9-Inch 1 Horsepower Open Stand Belt Disc Sander, 120-Volt 1 Phase
|
by Delta
Sales Rank: 10590
|
List Price: $437.72
$249.95
At Amazon
on 10-20-2008.
|
|
Belt unit can be used vertically or horizontally for a variety of applications
Tilting table has a miter gauge slot and can be used with either the belt or disc unit
Belt tensioning lever and tracking control knob provide easy belt replacement and adjustment
Built -in dust port for use with a vacuum or dust collector
Two-year limited warranty on machines, parts, and accessories
Product Review
Durably constructed with a fully enclosed 1-horsepower induction motor and a die-cast aluminum base to dampen vibration, Delta's combination belt/disc sanding station is designed to make removing both small and large amounts of material a quick and easy operation. To round corners and smooth over large curves, the 9-inch disc sander spins quietly at 2,800 rpm. Its cohort, the versatile 48-by-6-inch belt, cycles 2,200 square feet per minute over a heat-reducing graphite pad that helps increase belt life. In tests, we found it quickly adjusted from horizontal to vertical and locked easily into position for use on 180-degree curves and cutouts. The tool-free tracking knob makes it easy to maintain belt alignment, and the cast-aluminum worktable bevels 45 degrees to accommodate angles on either surface. We found changing sandpaper on both tools relatively easy, and appreciated the integral 2-1/4-inch port for dust collection. The included steel stand is sturdy and features nonslip pads to help keep it in place. --Justin Paul
Product Description
Includes 6" Belt/9" Disc Sander - 31-695R, 1 HP, 120 Volt Induction Motor, 80-Grit Abrasive Belt, Stand, Tilting Table, Backstop, T-Handle Wrench.
Customer Reviews & Comments
I needed a stationary sander, and Delta's 31-695 was the unit that was in my price range. It went together well, and sands satisfactorily, but just seems to lack something. I didn't want to spend the nearly $800 for the Delta sanding center, but in the long run..., I probably should've held out. The cast aluminum table for the disc sander is flimsy, and does not adjust well to angled sanding. I've already stripped out one of the retention knobs and have noticed a little difficulty with belt tracking. Other than those issues, it's OK, I wouldn't purchase another one though.
|
DELTA 31-695 6-Inch 9-Inch 1 Horsepower Open Stand Belt Disc Sander, 120-Volt 1 Phase
List Price: $437.72
Available from Amazon
Price: $249.95
Updated on 10-20-2008.
|
|
|
|
|
NOTICE: All product prices, availability, and specifications
are subject to verification by their respective retailers.
Copyright © 2008, Dominant Systems Corporation
3850 Varsity Drive
Ann Arbor, MI 48108
info@toolrealm.com
Privacy Policy
Last Modified : 10-20-2008
|
|
|
|
