|
If you have any questions on any of our Disc Sanders
please contact us at (734) 971-1210 Monday-Friday
9-5p.m. EST.
You have found Grizzly G7297 12 Disc Sander, one of 649 products we have for sale in our Disc Sanders store. At Tool Realm, we strive to provide the highest quality and lowest prices on all kinds of tools that are available through our merchant partners, including Grizzly G7297 12 Disc Sander. If you cannot find what you are looking for you may want to visit our complete listing of Disc Sanders products or use one of the search boxes located above this section. Thank your shopping at Tool Realm!
|
|
|
|
|
|
 |
|
|
Grizzly G7297 12 Disc Sander
|
Tools & Hardware > Disc Sanders > Product 55
 |
|
 |
 |
Grizzly G7297 12 Disc Sander
|
by Grizzly
Sales Rank: 42401
|
List Price: $149.95
$129.95
At Amazon
on 11-8-2008.
|
|
110V, 1 H.P., 10 Amp, TEFC motor
Accepts 12" PSA discs
Large 17-1/4" x 8-1/4" aluminum table
Miter gauge
Table tilts from 0 - 45°
Product Description
When we tested this big disc sander, we were more than impressed by its smooth operation. A powerful 1 HP motor drives this heavy-duty machine for all day dependability. Features include a 8 1/4" x 17 1/4" cast aluminum table that tilts from 0 degrees - 45 degrees cast iron base with built-in dust port, 110 volt - 10 amp motor that turns at 1725 RPM and a miter gauge. This really is a super deal!
Customer Reviews & Comments
I ordered my disc sander on 3-7 and received it on 3-9. Very fast delivery! But, I did find a few things that lack in quality. The first thing I found was the table lock handle assembly for the right side was not machined properly. There is a tapped hole in the end of the barrel that accepts a spring and screw to keep the handle mated to the barrel via a series of serrations. The hole was not drilled deep enough for the screw to fully engage and the end result was it stripped out and the handle would not stay on. All the fasteners used in assembly are metric. My fix was to tap out the hole for the barrel where it screws into the dust chute cover for a 1/4-20 NC Allen head bolt. The left side was OK. Next, the directions say to set the table 1/16" from the disc. With the screws used to adjust the table, the best I could achieve was 1/8". My fix will be to change the screws to a smaller size or enlarge the slotted holes in the left and right trunnions. If this gap is not even, it will throw the mitre gauge out of square. On the plus side, the motor is the most powerful I was able to find(1hp) and once the corrections were and are made, it will be a good heavy duty unit. The rubber feet dampen the noise and vibration very well. If it were not for the items I mentioned, I would have given it a higher rating.
|
Grizzly G7297 12 Disc Sander
List Price: $149.95
Available from Amazon
Price: $129.95
Updated on 11-8-2008.
|
|
|
|
|
NOTICE: All product prices, availability, and specifications
are subject to verification by their respective retailers.
Copyright © 2008, Dominant Systems Corporation
3850 Varsity Drive
Ann Arbor, MI 48108
info@toolrealm.com
Privacy Policy
Last Modified : 11-8-2008
|
|
|
|
