|
If you have any questions on any of our Disc Sanders
please contact us at (734) 971-1210 Monday-Friday
9-5p.m. EST.
You have found JET 708411 JOVS-10 5-1 2-Inch Oscillating Vertical Spindle Sander 115-Volt 1 Phase, one of 652 products we have for sale in our Disc Sanders store. At Tool Realm, we strive to provide the highest quality and lowest prices on all kinds of tools that are available through our merchant partners, including JET 708411 JOVS-10 5-1 2-Inch Oscillating Vertical Spindle Sander 115-Volt 1 Phase. If you cannot find what you are looking for you may want to visit our complete listing of Disc Sanders products or use one of the search boxes located above this section. Thank your shopping at Tool Realm!
|
|
|
|
|
|
 |
|
|
JET 708411 JOVS-10 5-1 2-Inch Oscillating Vertical Spindle Sander 115-Volt 1 Phase
|
Tools & Hardware > Disc Sanders > Product 9
 |
|
 |
 |
JET 708411 JOVS-10 5-1 2-Inch Oscillating Vertical Spindle Sander 115-Volt 1 Phase
|
by Jet
Sales Rank: 5272
|
List Price: $1,307.00
$1,064.99
At Amazon
on 12-22-2008.
|
|
1 hp, 115 volt motor
Includes 1/4 inch to 4 inch spindles , 10 each
Push button starter button
39-inch table height
4-inch dust chute
Manufacturer Description
Includes 2 spindle wrenches and 4-inch dust chute. 1 hp, 115-volt motor. Table is mounted on trunnions. Includes 10 spindles from 1/4- to 4 inches. All have threaded ends for quick changes. Spindle and table inserts are located on a cast-aluminum rack. Main spindle support runs in precision ball bearings and is oscillated by a heavy-duty worm-and-gear mechanism that runs in an oil bath. Sturdy one-piece stand. Push button starter buttons. 39-inch table height helps prevent user fatigue.
FEATURES
- Table is mounted on trunnions system
- 10 spindles from 1/4" to 4" in diameter all have threaded ends for quick changes
- Spindle and table inserts are conveniently located on a steel rack
- Main spindle support runs in precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism
- Worm and gear mechanism runs in an oil bath
- Sturdy one piece steel stand
- Push button starter buttons provide fingertip control
- The motor is located inside the base and is independently mounted for easy service
- 39" table height helps prevent operator fatigue
STANDARD EQUIPMENT
- Complete set of 10 removable spindles 1/4" to 4" diameter
- 1/4" diameter x 5" long steel
- 3/8" diameter x 6" long steel
- 1/2" diameter x 6" long steel
- 5/8" diameter x 6" long steel
- 3/4" diameter x 9" long steel
- 1" diameter x 9" long rubber
- 1-1/2" diameter x 9" long rubber
- 2" diameter x 9" long rubber
- 3" diameter x 9" long rubber
- 4" diameter x 9" long rubber
- Three table insert rings
- Two spindle wrenches
- 4" dust chute
SPECIFICATIONS
Model: JOVS-10
Table Size (in): 24 x 24
Table Tilt (Down): 45 degrees
Spindle Speed (RPM): 1,725
Oscillations (per minute): 75
Length of Oscillations (in): 1-1/2
Motor (TEFC): 1 HP, 1 Ph 115V Only
Net Weight (lbs): 298
Product Description
Spindle Sander Table is mounted on trunnions system 10 spindles from 1/4" to 4" in diameter all have threaded ends for quick changes Spindle and table inserts are conveniently located on a steel rack Main spindle support runs in precision ball bearings and is oscillated by a heavy-duty worm and gear mechanism Worm and gear mechanism runs in an oil bath Sturdy one piece steel stand Push button starter buttons provide fingertip control The motor is located inside the base and is independently mounted for easy service 39" table height helps prevent operator fatigue Standard Equipment Complete set of 10 removable spindles 1/4" to 4" diameter 1/4" diameter x 5" long steel 3/8" diameter x 6" long steel 1/2" diameter x 6" long steel 5/8" diameter x 6" long steel 3/4" diameter x 9" long steel 1" diameter x 9" long rubber 1-1/2" diameter x 9" long rubber 2" diameter x 9" long rubber 3" diameter x 9" long rubber 4" diameter x 9" long rubber Three table insert rings Two spindle wrenches 4" dust chute Optional Accessories Mobile base (708188) Sanding sleeves.
Customer Reviews & Comments
I've tried some other bench top spindle sanders and had to move up from a piece of junk that I've been using for the past couple of years. I wanted a bigger table, smoother action from the sanding spindle, and a smoother surface to work on. Additionally, I wanted a dedicated tool on its own stand. I spend a lot of time at the spindle sander. I wanted a comfortable and rock steady station to work. After looking at what was available, my choice came down to this unit and one made by Grizzly. After looking very closely at the pictures and manuals offered by both companies, I decided that these were very likely made by the same company in China. There are virtually no differences that can be determined.... except one. The Jet's table is rounded on the corners. I envisioned pemanent bruises on my hips from running into sharp corners of the Grizz. I own several Jet and Delta tools. I like working with tools that are well finished, that have a surplus of power for the job, that have smooth and flat work surfaces, and look good. I have customers in my shop all the time, so appearances mean a lot. So, for the looks and rounded top corners, I decided to spend the extra couple hundred for the Jet. I am not dissapointed. The work surface has been machined flat and sanded smooth. It has the nicest surface of any machine in my shop. The unit came fully assembled. All I had to do was to remove the protective gunk that prevents rust from the table top and install the sleeves on the spindles. The manual is nicely prepared in B&W and has good pictures to illustrate the points being made. The manual is also pleasantly short yet covers all significant details. The spindle action is smooth and quiet. There is plenty of power to quickly remove material but it is easy to control as well. The result is you'll have exceptional control when removing material. I hooked up my dust collection and with only 650 CFM, it pulls most all the dust very well. I'm very impressed with the operation of the tool. It is truly the nicest OSS that I've used. The machine comes with a full assortment of different sized spindles of 60 grit paper. I practically never use 60 grit for my projects. I've found that sanding spindles are available from Southern Tool and from Grizzly. I've got some on order for the sizes and grits I use most. It also has a 4 inch spindle. This is great for sanding straight edges or large arcs. One nit that I have is that there are two shelves for spindle storage, one mounted on each side of the cabinet. The holes in these shelves accomodate the smaller spindles well enough. But the larger spindles have large nuts on the bottom and don't fit in the smaller holes. They keep tipping or even fall out when I move the tool around. Other than the silly thing with the spindle storage, I feel that this tool is of the highest quality. I am very happy with this purchase and highly recommend the tool for anyone who needs a spindle sander.
|
JET 708411 JOVS-10 5-1 2-Inch Oscillating Vertical Spindle Sander 115-Volt 1 Phase
List Price: $1,307.00
Available from Amazon
Price: $1,064.99
Updated on 12-22-2008.
|
|
|
|
|
NOTICE: All product prices, availability, and specifications
are subject to verification by their respective retailers.
Copyright © 2008, Dominant Systems Corporation
3850 Varsity Drive
Ann Arbor, MI 48108
info@toolrealm.com
Privacy Policy
Last Modified : 12-22-2008
|
|
|
|
