Leatherman 934870 40 Bit Assortment with Nylon Sheath at Tool Realm

About the Leatherman 934870 Bit Kit
The Leatherman Bit Kit expands your driver's capabilities with 21 double-ended tool steel bits (42 tips total). Use this kit with your Surge, Charge AL, Charge ALX, Charge TTI, Wave or the Removable Bit Driver. This kit includes a wide assortment of hex, Robertson, Pozi, Torx, Phillips and slotted bits, plus a nylon sheath to keep the kit organized and easily transportable. Made from steel with a zinc coating, these bits are 35 percent stronger than stainless steel bits, and more resistant to corrosion.

Bit Kit Contents:

Hex 1.5mm and 2mm
Hex 2.5mm and 3mm
Hex 4mm and 5mm
Hex 6mm and 1/4 inch
Hex 7/32 and 3/16 inch
Hex 5/32 and 9/64 inch
Hex 1/8 and 7/64 inch
Hex 3/32 and 5/64 inch
Hex 1/16 and .050 inch
Robertson #3 and #2
Robertson #1 and Pozi
Pozi #2 and #1
Torx #10 and #15
Torx #20 and #25
Torx #27 and #30
Phillips #0 and #3
Phillips #1 and #2
Slotted 3/32 and 1/8 inch
Slotted 5/32 and 3/16 inch
Slotted 7/32 and 1/4 inch
Phillips and flat tip eyeglasses screwdriver

Warranty:
Close inspection reveals the quality and attention to detail that make Leatherman products more useful and effective. Using the best stainless steel, ingenious design and rigorous tolerances, Leatherman makes the useful products that customers want, and backs them with a 25-year guarantee. A genuine Leatherman tool is always ready when you need it.

Included with this Product
Leatherman bit kit with 21 double-sided bits, removable bit driver, nylon belt sheath.

Customer Reviews & Comments
I am a paratrooper in the United States Army and I use a multi-tool every day. I have been issued tools from Leatherman, Gerber and SOG and all have their good points as well as bad. The SOG rusted quite easily after being exposed to perspiration in Afghanistan. It was also not easy to expose the blades in the handle. Gerbers worked well, but the screwdrivers were not beveled well. Also the bottle opener was so short that it was difficult to open a cold Sam Adams. This assortment of bits works extremely well. I have never been a fan of leatherman multi-tools because of some poor design flaws in the early leatherman models. Specifically the original Leatherman tool was pretty hard on your hand when using the pliers. The "blades" were on the outside when the pliers were in the open position. If you ever had one, you know what I mean. Leatherman corrected that with the Wave series by contouring the handles, but the bevel on the screwdriver (flat head) left much to be desired. I used several Gerber models and was pretty satisfied with them (except for the LEDEND model.....no can opener) Gerbers also will pinch you if you are not careful when using the pliers. The Victorinox Swisstool is built well, and with MINIMAL care will never rust. The blades are sharp and their placement is well thought out. It has rounded edges in all the right places and as such is comfortable in your hand. It will never pinch you when using the pliers. I got a Leatherman XT-i as a gift and found it to be well made and comfortable to use. With the addition of this bit kit it should be even more functional. The bits seem to be well made and durable. I still find myself carrying my swisstool more often than the Leatherman, but that is out of 6 years of habit. I'm not ready to retire the Swisstool, but I will give the leatherman a chance. I also put the bits I thought I would use the most on one card and carry that in the belt sheath that the XT-i came in. That seems to work well.

Leatherman 934870 40 Bit Assortment with Nylon Sheath

Amazon.com Product Description