|
If you have any questions on any of our Painting Tools
please contact us at (734) 971-1210 Monday-Friday
9-5p.m. EST.
You have found Fuji Industrial Spray Equipment 3004 Q4 PRO Quiet 4-Stage HVLP Spray System, one of 749 products we have for sale in our Painting Tools store. At Tool Realm, we strive to provide the highest quality and lowest prices on all kinds of tools that are available through our merchant partners, including Fuji Industrial Spray Equipment 3004 Q4 PRO Quiet 4-Stage HVLP Spray System. If you cannot find what you are looking for you may want to visit our complete listing of Painting Tools products or use one of the search boxes located above this section. Thank your shopping at Tool Realm!
|
|
|
|
|
|
 |
|
|
Fuji Industrial Spray Equipment 3004 Q4 PRO Quiet 4-Stage HVLP Spray System
|
Tools & Hardware > Painting Tools > Product 23
 |
|
 |
 |
Fuji Industrial Spray Equipment 3004 Q4 PRO Quiet 4-Stage HVLP Spray System
|
by Fuji
Sales Rank: 3659
|
List Price: $995.00
$699.99
At Amazon
on 1-8-2009.
|
|
4-stage HVLP spray system; delivers approximately 7 psi
For quick, easy spraying of paints and latexes; effective noise reduction
Stainless steel fluid components
Includes turbine, 25-foot hose, spray gun, 1-quart cup, paint strainer, viscosity cup, cleaning brush, manual
36 by 29 by 23 centimeters; 39 pounds; 2-year warranty
Manufacturer Description
The Q4 PRO Model Turbine Spray System is Quiet. Using patented noise reduction, noise levels have been reduced to less than 50% of standard HVLP turbines. Patented soundproofing method ensures that there is not air restriction to the motor and also that there is no overheating.This is the most powerful 4-stage turbine system on the market and the quietest. Recommended for spraying paints and latexes. Now supplied with the new Fuji XT Non-Bleed Spraygun. The new Fuji XT spraygun is non-bleed - air only passes through the spraygun when the trigger is pulled. The benefit is less blowing around of shop dust and less paint buildup on the tip of the fluid nozzle. The spraygun features a stay-cool nylon handle, stainless steel fluid passages and an external needle packing adjustment. Obtain a professional finish with all known coatings. The standard Aircap set installed is the general purpose #4 for fine finishing with lacquers, enamels, polyurethanes, latex, water based coatings and more. The 3-stage turbine motor is manufactured by Ametek-Lamb Electric (Ohio). Complete system includes the Q4 PRO Quiet 4-stage turbine, hi-flex hose, XT Non-Bleed spraygun with 1Qt cup, paint strainer, viscosity cup, cleaning brush, and 20 page User Manual.
Customer Reviews & Comments
I have had this unit about 10 months now and I am very happy with it. My goal, in general, was to get a sprayer with the following features/functionality: -spray fine finishes such as lacquer and water borne finishes -also spray thin stains as well as occasional latex and oil-based paints -variable air pressure for more control -spend less than $1,000 This unit has satisfied those goals very well. The variable air control is really a must, in my opinion, otherwise I cannot adequately control the atomization. This air control works very well on this unit. It does not vary the motor speed, but varies the flow through the hose with a convenient control located at the gun handle - you can vary the flow as you work and fine tune it without having to run back to the compressor unit to make adjustments. I just turn the unit on and then make all the adjustments at the gun. This unit sprays everything have tried very well: thinned lacquer, straight stains and dyes, latex paint (with Flotrol), and slightly thinned oil base paint. The finishes are extremely smooth. Once I have the air and fluid controls set for a given project, the amount of overspray is really remarkably small. Although it is possible to create a lot of overspray, that usually means the air control is set to high. The unit is very easy to clean - usually I just run solvent through the gun after every coat. Then thoroughly clean the needle and nozzle after the project. A bonus for me is the sound level of the unit - it is really very low - it is like a mid range "whoosh" . Definitely not a loud unit at all. I find that once I have everything adjusted and start spraying, I do not even pay attention to the sound of the unit at all. I understand that some other brands have very irritating noise levels. Not so here. I also appreciate the manufacturer's after sale support. Very helpful. I also purchased (from Fuji direct) the 6 foot whip hose and the set of small plastic cups for small jobs. The whip hose is very light and I find it very helpful in maneuvering in my small spray area. I have been happy with the needle/nozzle combination which came with the unit, although my guess for the majority of my lacquer work, the #3 nozzle would work fine also.
|
Fuji Industrial Spray Equipment 3004 Q4 PRO Quiet 4-Stage HVLP Spray System
List Price: $995.00
Available from Amazon
Price: $699.99
Updated on 1-8-2009.
|
|
|
|
|
NOTICE: All product prices, availability, and specifications
are subject to verification by their respective retailers.
Copyright © 2009, Dominant Systems Corporation
3850 Varsity Drive
Ann Arbor, MI 48108
info@toolrealm.com
Privacy Policy
Last Modified : 1-8-2009
|
|
|
|
