010-060, 10 x 60 Tooth Radial Arm Saw Blade x .104 Kerf, 5 8 Arbor at Tool Realm

Make perfect crosscuts or rips on your radial arm saw (RAS) with this blade. The micro-grain carbide teeth are set with a 5° positive hook angle and feature a 30° alternate top bevel grind (ATB) so they provide very clean cuts in any crosscut or ripping application. More importantly, when used on a RAS, this blade will not 'climb' when cutting, an unsafe situation caused by using a blade with an aggressive hook angle. Looking for a good multi-use sawblade for you table saw? This is a very good choice as the teeth and geometry produce excellent results in all types of material, with the grain or against. Every sawblade is given our exclusive Nickel Armor coating. This tough and durable Nickel coating extends the life of your blade by preventing rust and eliminating pitch and resin build-up.

Customer Reviews & Comments
This is an amazingly clean cutting blade and it happens to have good versatility too. The Hi-ATB teeth are exceptional for crosscutting, but it also rips very cleanly in material to ~ 6/4". It'll excel in fine veneered plywood, melamine, hardwood, or other laminate, and is versatile enough to be used for general purpose work. It's cleaner cutting than my Forrest WWII, Ridge Carbide, Tenryu, DW7657, and Infinity Combomax, though it doesn't rip as aggressively. It's appropriate for just about any saw that'll take a 10" blade with 5/8" bore...table saw, CMS, SCMS, or RAS. It's just a beautifully made high performance precision blade.

010-060, 10 x 60 Tooth Radial Arm Saw Blade x .104 Kerf, 5 8 Arbor

Product Description